Types of Inventory Count Processes
While dealing with lots of inventory in a warehouse, lots of things can go wrong. Shipments may not have the right number of units in them, or they could get damaged somewhere along the supply chain. Discrepancies in the stock may arise as part of every inventory control, and need to be corrected immediately after the inventory control procedure has been finished.
There are two main options used by companies today, the physical inventory process and cycle counting. There are benefits of inventory cycle counting and physical inventory counts, but one of these methods may be the better option for you. The types of Count processes that may be followed are:
• Physical Count Process
• Cycle Count Process
A) What Is a Physical Inventory Count?
Physical Counts are performed to synchronize the physical and system inventory and are required as a part of the corporate policy or client requirements. During the physical count process, the warehouse is closed and no other activity is performed. This process is the actual count of the materials and products a business owns.
It ensures that the numbers recorded in the company’s books match the actual number of items on the sales floor, stockroom, and warehouses. This in-depth count is usually conducted once a year, with smaller sample counts several times in the year. A physical inventory count may be needed to meet tax regulations or financial accounting rules.
B) What Is a Cycle Counting Process?
The people who count the inventory in one go, may make mistakes along the way, so instead of fixing the inventory
records, you may actually create some new inaccuracies. Therefore, many companies have switched to cycle counting, in which they divide the facility and count each little bit of it at certain times throughout the year. By the end of the year, the company has done at least one physical inventory count in each section of the facility and corrected any errors that were found.
A warehouse cycle counting process is an inventory auditing procedure that is a part of an inventory management solution. In this procedure, a small subset of inventory in a specific location is counted on a specific day. The cycle counting method is a popular solution for inventory management that enables businesses to count multiple items within the warehouse, without needing to count the entire inventory. Cycle Counts can be done for a group of locations, on a daily basis, to ensure that location inventory mismatches are eliminated. This works because a certain number of items infers the count for the entire warehouse. If there happens to be an error found in this sampling technique, errors could also be expected to occur for other items in the warehouse. Cycle counting is beneficial and is a more cost-effective solution because there are less interruptions in operations.
The three types of cycle counting include the following:
Control Group:
This method is used to count items that will provide the best results and will focus on a small number of items that are counted several times in a short period. This repeated count process will reveal any errors in the technique. If there are any errors, they can be corrected. The control group process is repeated until the technique is accurate. Selection of control group could be on the basis of zones, product classes, or item classifications. For example, Velocity code is A, B, or C.
Random Sample:
This type of cycle counting is defined by the counting of items chosen as random. If a warehouse has a large number of similar items, a random amount can be selected to be counted. This count can be done daily so a large percentage of items in the warehouse can be counted in a shorter period of time.
ABC Analysis:
This is an alternative to random sample counting. It used the Pareto principle as the basis, which states that for many events, about 80 percent of the effects come from 20 percent of the causes.
Over, Short, and Damaged
While dealing with lots of inventory in a warehouse, lots of things can go wrong. Shipments may not have the right number of units in them, or they could get damaged somewhere along the supply chain. Discrepancies in the stock may arise as part of every inventory control, and need to be corrected immediately after the inventory control procedure has been finished.
To deal with these issues, warehouse should have an over, short, and damaged (OS&D) process. A well laid down OS&D process helps to fix problems efficiently and maintain accurate records of how discrepancies have been resolved. Correcting the discrepancies should have appropriate controls put in place including approvals. Each corrected item should contain the description of the possible cause of the discrepancy.
Given below are some common types of discrepancies observed during a count process:
Destruction Lack in stock resulted from complete destruction of the product due to the labor/worker's fault.
Delivery Error: Discrepancy due to incorrect acceptance of delivery.
Release Error: Discrepancy was due to incorrect release of goods
Return Error: Discrepancy was due to incorrect acceptance of return
Lost: Unexplained discrepancies were found, goods are unavailable for release until this matter has been resolved.
Found: Unexplained discrepancies were found, stock adjustments marked as “Found” must be explained.
Shrinkage: When inventory disappears for unexplained reasons, that disappearance is called shrinkage. It is important to measure shrinkage and keep it as low as possible.
Related Links
You May Also Like
-
What is a Warehouse & why companies need them?
All organizations hold stocks. In virtually every supply chain, gaps exist between when something is produced and when a customer is ready to buy or receive it. Stocks occur at any point in the supply chain where the flow of materials is interrupted. This implies that products need to be stored during this period of gap.
-
After products have been received and passed a quality inspection, they need to be stored so that you can find them when you need them. This process is called putaway. The spot where you store a particular product is called a location. One section of a warehouse might have small locations for light items; another area may have large locations on the floor for heavy items.
-
Warehouse management and distribution logistics involve the physical warehouse where products are stored, as well as the receipt and movement of goods takes place. Warehouse management aims to control the storage and movement of products and materials within a warehouse. These operations include the receipting of inwards goods, tracking, stacking and stock movement through the warehouse.
-
When products arrive at a facility, there need to be a defined process to let them in. The process for accepting inventory when it arrives is called "Receiving". Any warehousing operation must be able to receive inventory or freight from trucks at loading docks and then stow them away in a storage location. Receiving often involves scheduling appointments for deliveries to occur, along with unloading the goods and performing a quality inspection.
-
Inventory is money, and hence businesses need to perform physical inventory counts periodically to make sure that their inventory records are accurate. The traditional approach to conducting inventory counts is to shut down a facility during a slow time of year to count everything, one item at a time. This process is slow, expensive, and (unfortunately) not very accurate.
-
At a high level, the essential elements in a warehouse are an arrival bay, a storage area, a departure bay, a material handling system and an information management system. As part of the process for enabling a warehouse layout, you must define warehouse zone groups, and zones, location types, and locations.
-
Types of Order Picking Methods in the Warehouse
There are many different types of picking in a warehouse and each one works as a customized solution for each business. Depending on the size of your warehouse and inventory, the manpower you have on hand, and the number of customer orders made each day, there may be certain methods that are more efficient for you than others.
-
What is the difference between Warehouse Management & Inventory Management?
The terms “inventory management” and “warehouse management” are sometimes mistakenly used interchangeably as they both deal with operations and products of industries. Despite their few similarities, there are many notable differences between warehouse and inventory management systems.
-
In the normal course of business, customers are likely to return orders from time to time due to various reasons and business should design processes the manage and accept such returns. A well designed returns management process can reduce costs and issues associated with returns or exchanges.
-
Warehouses can be places where piles of packed or loose products occupy space. If left disorganized, it will become very challenging to identify products for packing or picking. Hence, proper organization of warehouse is very important. Warehouse labeling systems eliminate this problem by making sure products are easily identified and managed during the warehousing and shipping process. Labeling is the most functional and cost-effective way to keep your warehouse organized and operating efficiently.
